20m Spreading Distance - will reach the rear of most sheds
Handles rectangular bales & round bales.
Electronic Control fitted as standard
Self Loading provided by hydraulic rear tailgate
Two speed gearbox for good flexibility
Easy to maintain modular system to allow easy dismantling.
Choice of 808 Mounted or 8080 Trailed.
Dual Chop - Change from Short Chop to just Spreading at the flick of a switch.
Chop Straw Short - Straw is cut by a sytem of blades and rotating fingers until it is short enough to pass through a screen. Ideal for cubicles and poultry etc.
Spread Straw Long - The knives and screen are taken out of operation hydraulically, allowing the straw to be teased out of the bale and straight into the discharge rotor. Ideal for loose housing
Easy to Load - can self load using the hydraulic tailgate or bales can be dropped in using a loader.
Mechanical Drive to cross beater gives enormous output - full size Heston bale shredded in 2 minutes.
Easy to Operate everything is hydraulically controlled. The swivel giraffe chute, with 280° of rotation, is the ultimate bedding device in awkward areas and confined spaces.
View Brochure
Spreads straw up to 20 metres with ease
Feeds silage - baled and clamp
Enormous capacity - 6 cubic metres of clamp silage
Handles all rectangular bales & round bales up to 6ft. in diameter
Minimum of shredding ideal for loose housing - Up to 30% straw saving
Self Loading provided by hydraulic rear tailgate
Twin cross beaters meter material into discharge rotor giving high throughput, very even feed and even power requirement.
Trailed design and low power input enables use on relatively small tractors
Cable control of all hydraulic functions enables cab windows to be kept closed.
Two speed gearbox for good flexibility
Dual Purpose - shreds straw for bedding & feeds baled silage
Less Wastage/Improved Intake due to easier eating, improved palatability & non-selective eating
Better Health results from feeding chopped silage. Eye infections are greatly reduced when long material is eliminated.
Better Straw Utilisation in loose housing due to more effective spreading.
5'-10" Cut Single rotor semi-offset machine gives a good finish with a minimum of wheelings
Heavy Duty Fabricated Blade Holder mounted directly on the gearbox output shaft
Height adjustment using skids
Low Power Rating ideal for compact tractors - 19kW upwards
8' Cut In-Line/Semi-offset machine - sliding headstock for use either in-line or semi-offset
Heavy Duty Rotors - Spring steel blade holders and heavy swinging blades rotating on hardened bushes.
Overlapping Rotors for superb finish
Height adjustment using skids
9' Cut In-Line machine
Front or Rear Mounting are standard features built into the machine.
Reversible PTO rotation just unbolt the centre gearbox and turn it upside down.
540 or 1000 rpm gearbox ratios are available - front mounting where the PTO runs at 1000 rpm is not a problem.
Shaft drive, incorporating rubber couplings, between the gearboxes means that the rotors can be timed and overlapped to eliminate any possible uncut strips.
View Brochure
